Kenwood KPG-49D (TK-280 380 480 481 780 880 980 981) A. GENERAL SOFTWARE LICENSE NOTICE: 1. The copyright for the software is the property of the KENWOOD Corporation. The software shall not be used or copied except as authorized in writing by the KENWOOD Corporation. KPG-49D software is a tool for programming the TK-780/880/280/380/980. KENWOOD NETWORK COMMAND SYSTEM Radio Host Program ARHP-990 Version 1.03 (Free) January 2019: KENWOOD NETWORK COMMAND SYSTEM Radio VoIP Program ARVP-10 Version 1.03 (Free) August 2018: TS-990S KENWOOD NETWORK COMMSND SYSTEM Setting Manual (PDF:898KB) January 2019. Kenwood Mobile radios TK-780, TK-880, TK-981, and TK-980 all program in the same way using Kenwood Software and a USB to RG-45 connector. These radios are commercial radios from Kenwood and support HAM bands. Systems, groups, channels, and their functions are programmed by your dealer. ■Conventional Format (TK-780 and TK-880 only) This format can handle up to 250 groups with 250 channels in each group. The transceiver can be used only in conventional mode. Groups, channels, and their functions are programmed by your dealer. Kenwood KPG-49D is the genuine programming software for the Kenwood TK-780, TK-880, TK-280, TK-380, TK-980, TK-981, TK-480, TK-481 two way radio(s). Programming cable sold separately: No programming cable is included. This is a software download only. Operating System Note: This only works on MS-Dos or DOS-Box. We can not offer any support for.

This is an FCC Title 47 Part 90 certified transceiver. This is a business band radio that is possible to program for use on 70cm ham radio.

• Band: 450-490 Mhz
• 32 systems / 250 groups (trunked mode)
• Max 600 channels (trunked mode)
• Max 250 channels capacity (conventional mode)
• 12 character dot matririx LCD
• 10 character alphanumeric alias
• Wide or narrow bandwidth frequencies

Of the various revisions the two main models:

• TK-880 is 5W on low power and 25W on high power
• TK-880H is 10W on low power and 45W on high power

• 1programming

programming

You need the KPG-49D programming software and an appropriate cable. The KPG-49D software can program all radios in the TK-X80 series. Bfme2 1.06 patch download. The last released KPG-49D software runs under Windows. The cable is serial on one end and RJ45 on the other.

Programming Software For Kenwood Tk 880

The TK-880 will program below 450 MHz, but the receive sensitivity is reduced. The 70cm amateur radio band is the 420 to 450 MHz portion of the UHF radio spectrum. It is said that most Kenwood LMRS 450-490 radios will go to about 442-443 mhz, but the VCO can easily be adjusted to go lower.

Re-align the radio for optimum performance on 70cm.

Kenwood Tk 880 Programming software, free download

software

K-880 use software KPG-49D. The KPG-49D Version 2.(any number) and 3.(any number) are DOS based, while version 4.(any number) are Windows based and much easier to use. /super-mario-galaxy-2-iso-download-german.html. For a programming cable use KPG-46.

Kenwood Tk-880-1 Programming Software

• Recommended Software: KPG-49D Version 4

For the European version of the K-880 you will instead use the KPG-60D DOS software with the same KPG-46 cable.

kenwood programming software reference for the TK-880

• TK-880-V1-Only - E4B3 Use only in Version 1 Radios CURRENT
• TK-880-V2-Only - 411XXXXX E613 Corrects no mic PTT after TX via COM1 203.85 KB CURRENT
• TK-880-V2-Only - 410XXXXX 8C84 Corrects busy ch. lockout on conventional data channels 203.56 KB
• TK-880-V2-Only - 310xxxxx 2523 Corrects cannot decode MSK PTT ID when product is first turned on 202.95 KB
• TK-880-V2-Only - 306XXXXX 541D Allows PTT after attempting PTT while receiving an LTR Fleetsync PTT ID 202.13 KB
• TK-880-V2-Only - 302XXXXX 697B Corrects lock-up when GPS receiver sends a comma when set for $PRMC 201.97 KB

Kenwood Kpg 49d Software Download

resources

Yahoo Group for .

Kenwood Tk 880 Programming Software